paper lamination machine safety operating procedures

paper lamination machine safety operating procedures

1, temperature control instrument sensing element is the use of electric thermocouple to detect the temperature, due to the installation location and the surrounding temperature and internal wind flow of the influence of the larger, the accuracy of temperature measurement has a large error, the temperature indicated on the temperature table for the relative temperature, Lu should be based on the actual processing experience relative to the reference temperature table of the indicated value and choose the temperature.

2、Glue and thinner, cleaning agent are flammable, so pay attention to fire hazard near the machine.

3、When the machine is running, it is forbidden to put your fingers into the two rollers to avoid sticking your hands. The temperature of the pressed roller of the machine is high, do not touch the hand to prevent burns.

4、When scrubbing the machine, the machine should be started at low speed. Should be in the correct position to scrub, strictly prevent the two rollers in the grinding and dragging hands of the cloth block.

5, maintenance and inspection of the machine should be turned off the machine's power switch. The machine's electrical system should be kept well insulated to prevent moisture. Stop using the machine should cut off the power supply to prevent accidents.

6、It is strictly forbidden to put any tools, devices and miscellaneous things on the machine, the working air gap of the rubber coating roller and the rubber roller is very small, any hard object once pressed into the surface of the rubber roller Once any hard object is pressed into the surface of the rubber roller, it will leave crater depression or crack on the rubber. The light one needs a long time to recover the natural elasticity, the one directly when the rubber roller is scrapped.

7、The newly installed machine should strengthen the lubrication of the machine, and pay attention to not to use the machine quickly in the machine transmission break-in period.

8、When stopping. Make sure to unload the air pressure system, separate the pressure roller from the rubber roller and release the scraper and pre-pressure roller in time, so as not to damage the two rollers by long-term pressure deformation.