Notes on the operation of automatic laminating machine

What matters need to be noted when operating the automatic laminating machine? What failures will occur in the use of automatic laminating machine? And in the event of these failures how to resolve it? Here we go with me to understand the operation of the automatic laminating machine notes it!

The machine does not start because the voltage is not enough, the input wire is different, the power cord is connected backwards; if the installation is not correct, it will cause inaccurate temperature measurement; the gas circuit does not work will cause damage to the vacuum table; the total power supply will be leaking from time to time, tripping and other phenomena, there are certain hidden dangers; vacuum degree if it does not meet the requirements, not only leakage will cause problems with the quality of the film; production process must ensure that the surface to Smooth, polished in place, otherwise the film quality problems; always pay attention to whether the hand valve is open, so that the film will not pull down when absorbing; heating temperature is not too high, it will cause the phenomenon of play broken.

Next, teach you how to properly operate the laminator: 

1. Check whether the pressure material device and each rotating part are intact and normal before going to work.

2. Clean up the dust and dregs in the working table.

3. Prepare the required product pads (6-8 mm smaller than the workpiece) and other necessary materials.

4.Vacuum laminating machine check and adjust the temperature and schedule setting according to the thickness of film material.

5. Multi-piece combined table processing according to the processing plate thickness placed at the right distance (generally 3-4 times the thickness of the plate).

6. Before starting the heating cover to see if the press frame is locked, whether there are objects on and around the guide rail and whether the hands of personnel leave.

7. vacuum laminating machine machine work process, it is strictly forbidden to stand around the machine, more hands on the rail and equipment, to prevent the machine automatically returned to the heating hood injury.

8. Strictly forbidden to place products and other objects on the heating hood.

9. When the machine is found to be working abnormally, the power should be turned off immediately and the leader in charge should be notified.

10. Do not disassemble the safety and other protective items at will.

11. During the work, the operator shall not leave the machine.

12. Turn off the power when the work is finished. The above is the operating procedures of vacuum laminating machine.

We must follow the correct method of operation, otherwise there will be danger.